Part Number(s) (NSID) |
Top View | Type | Pins | MSL Rating | Peak Reflow | RoHS Status |
CAD Symbols | Models | Package Marking Format |
---|---|---|---|---|---|---|---|---|---|
LM5575MH/NOPB LM5575MH |
TSSOP EXP PAD | 16 | 1 1 |
260 260 |
Detail | Download | N/A |
NSUZXYTT LM5575 MH |
|
LM5575MHX/NOPB LM5575MHX |
TSSOP EXP PAD | 16 | 1 1 |
260 260 |
Detail | Download | N/A |
NSUZXYTT LM5575 MH |
|
LM5575QMH/NOPB |
TSSOP EXP PAD | 16 | 1 | 260 | Detail | Download | N/A |
NSUZXYTT LM5575 QMH |
|
LM5575QMHX/NOPB |
TSSOP EXP PAD | 16 | 1 | 260 | Detail | Download | N/A |
NSUZXYTT LM5575 QMH |
Description
The LM5575 is an easy to use SIMPLE SWITCHER® buck regulator which allows design engineers to design and optimize a robust power supply using a minimum set of components. Operating with an input voltage range of 6 - 75V, the LM5575 delivers 1.5A of continuous output current with an integrated 330mΩ N-Channel MOSFET. The regulator utilizes an Emulated Current Mode architecture which provides inherent line regulation, tight load transient response, and ease of loop compensation without the usual limitation of low-duty cycles associated with current mode regulators. The operating frequency is adjustable from 50kHz to 500kHz to allow optimization of size and efficiency. To reduce EMI, a frequency synchronization pin allows multiple IC’s from the LM(2)557x family to self-synchronize or to synchronize to an external clock. The LM5575 guarantees robustness with cycle-by-cycle current limit, short-circuit protection, thermal shut-down, and remote shut-down. The device is available in a power enhanced TSSOP-16 package featuring an exposed die attach pad for thermal dissipation. The LM5575 is supported by the full suite of WEBENCH On-Line design tools.
• | Automotive |
• | Industrial |
• | LM5575Q is an Automotive Grade product that is AEC-Q100 grade 1 qualified (−40°C to + 125°C operating junction temperature) |
• | Integrated 75V, 330mΩ N-channel MOSFET |
• | Ultra-wide input voltage range from 6V to 75V |
• | Adjustable output voltage as low as 1.225V |
• | 1.5% feedback reference accuracy |
• | Operating frequency adjustable between 50kHz and 500kHz with single resistor |
• | Master or slave frequency synchronization |
• | Adjustable soft-start |
• | Emulated current mode control architecture |
• | Wide bandwidth error amplifier |
• | Built-in protection |
• | Automotive Grade product datasheet that is AEC-Q100 grade 0 qualified is available upon request. |
• | (−40°C to + 150°C operating junction temperature) |
Diagrams
Typical Application
|
Block Diagram
|
Typical Performance
|