简体中文 English Welcome to http://www.henlito.com| Add Favorite

  HOT SEARCH:lm358 130N10 
Home Stock Centers Photo Gallery Brand Category Information goods Online order Contact About
Quick Search
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9
News & Events Address:Home > News & Events

A8436 Photoflash Capacitor Charger with IGBT Driver


source: | post time:2010-01-09

Description

The A8436 is a highly integrated IC that charges photoflash capacitors for digital and film cameras. It also features an integrated IGBT driver that facilitates the flash discharge function and saves board space.

To charge the photoflash capacitor, the A8436 integrates a 40 V, DMOS switch that drives the transformer in a flyback topology, allowing optimized design with tight coupling and high efficiency. A proprietary control scheme optimizes the capacitor charging time. Low quiescent current and low shutdown current further improve system efficiency and extend battery life.

Three levels of switch current limit are provided: 1.0, 1.2, and 1.4 A. The level is determined by configuring the ILIM pin as grounded, floating, or pulled up to IC supply voltage, respectively.

The CHARGE pin enables the A8436 and starts the charging of the output capacitor. When the designated output voltage is reached, the A8436 stops the charging until the CHARGE pin is toggled again. Pulling the CHARGE pin low stops charging. The DONE pin is an open-drain indicator of when the designated output voltage is reached.

The A8436 can be used with two Alkaline/NiMH/NiCAD or one single-cell Li+ battery connected to the transformer primary. Connect the VIN pin to a 3.0 to 5.5 V supply, which can be either the system rail or the Li+ battery, if used.

The A8436 is available in a very low profile (0.75 mm) 10-terminal 3 mm × 3 mm MLP/TDFN package, making it ideal for space-constrained applications, as well as an MSOP. They are lead (Pb) free, with 100% matte-tin leadframe plating.

The A8436 is part of a product family that includes the A8438and A8439.

Functional Block Diagram

Functional Block Diagram

Pin-Out or Package

Features

  • Power with 1 Li+ or 2 Alkaline/NiMH/NiCAD batteries
  • Adjustable output voltage
  • >75% efficiency
  • Three levels of switch current limit: 1.0, 1.2, 1.4 A
  • Fast charge time
  • Charge complete indication
  • Integrated IGBT driver with trigger
  • No primary-side Schottky diode needed
  • Low-profile packages

Applications

  • Digital camera flash
  • Film camera flash
  • Cell phone flash
  • Emergency strobe light

source:ShenZhen henlito electronic co.,ltd.

web:www.henlito.com


Prev:A6210 3 A, 2 MHz Buck-Regulating LED Driver
Next:A8438 Photoflash Capacitor Charger with IGBT Driver


Home | Stock Centers | Photo Gallery | Brand Category | Information goods | Online order | Contact | About
Copyright @ 1998 - 2009 Henlito. All Rights Reserve
page load time:0.0157345 s
在线客服系统

IGBT模块IGBT 三菱IGBT英飞凌IGBT模块Infineon英飞凌SEMIKRONSanRex西门康整流桥三社可控硅

富士IGBT