简体中文 English Welcome to http://www.henlito.com| Add Favorite

  HOT SEARCH:SP485EN 2n5089 
Home Stock Centers Photo Gallery Brand Category Information goods Online order Contact About
Quick Search
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9
News & Events Address:Home > News & Events

SN75LBC184DR Transient Voltage Suppression Differential Transceiver


source: | post time:2010-01-27

SN75LBC184 Datasheet:
SN75LBC184

Description

The SN75LBC184 and SN65LBC184 are differential data line transceivers in the trade-standard footprint of the SN75176 with built-in protection against high-energy noise transients. This feature provides a substantial increase in reliability for better immunity to noise transients coupled to the data cable over most existing devices. Use of these circuits provides a reliable low-cost direct-coupled (with no isolation transformer) data line interface without requiring any external components.

The SN75LBC184 and SN65LBC184 can withstand overvoltage transients of 400-W peak (typical). The conventional combination wave called out in IEC 61000-4-5 simulates the overvoltage transient and models a unidirectional surge caused by overvoltages from switching and secondary lightning transients.

Features

  • Integrated Transient Voltage Suppression
  • ESD Protection for Bus Terminals Exceeds:
    • ±30 kV IEC 61000-4-2, Contact Discharge
    • ±15 kV IEC 61000-4-2, Air-Gap Discharge
    • ±15 kV EIA/JEDEC Human Body Model
  • Circuit Damage Protection of 400-W Peak (Typical) Per IEC 61000-4-5
  • Controlled Driver Output-Voltage Slew Rates Allow Longer Cable Stub Lengths
  • 250-kbps in Electrically Noisy Environments
  • Open-Circuit Fail-Safe Receiver Design
  • 1/4 Unit Load Allows for 128 Devices Connected on Bus
  • Thermal Shutdown Protection
  • Power-Up/-Down Glitch Protection
  • Each Transceiver Meets or Exceeds the Requirements of TIA/EIA-485 (RS-485) and ISO/IEC 8482:1993(E) Standards
  • Low Disabled Supply Current 300 µA Max
  • Pin Compatible With SN75176
  • Applications:
    • Industrial Networks
    • Utility Meters
    • Motor Control

Packaging

Device Status Temp (oC) Package | Pins Top Side Marking Package QTY | Package Carrier
SN75LBC184D ACTIVE 0 to 70 SOIC (D)| 8 View 75 | TUBE Download CAD Format for this Symbol Download CAD Format for this Footprint
SN75LBC184DG4 ACTIVE 0 to 70 SOIC (D)| 8 View 75 | TUBE Download CAD Format for this Symbol Download CAD Format for this Footprint
SN75LBC184DR ACTIVE 0 to 70 SOIC (D)| 8 View 2500 | LARGE T&R Download CAD Format for this Symbol Download CAD Format for this Footprint
SN75LBC184DRG4 ACTIVE 0 to 70 SOIC (D)| 8 View 2500 | LARGE T&R Download CAD Format for this Symbol Download CAD Format for this Footprint
SN75LBC184P ACTIVE 0 to 70 PDIP (P)| 8 View 50 | TUBE Download CAD Format for this Symbol Download CAD Format for this Footprint
SN75LBC184PE4 ACTIVE 1.30 | 1ku PDIP (P)| 8 View Download CAD Format for this Symbol Download CAD Format for this Footprint

source:ShenZhen henlito electronic co.,ltd.

web:www.henlito.com


Prev:TPS76801QDRG4 Single Output LDO, 1.0A, Adj.(1.5 to 5.5V), Low Quiescent Current, Fast Transient Response
Next:TL3842DR Current-Mode PWM Controller


Home | Stock Centers | Photo Gallery | Brand Category | Information goods | Online order | Contact | About
Copyright @ 1998 - 2009 Henlito. All Rights Reserve
page load time:0.0315254 s
在线客服系统

IGBT模块IGBT 三菱IGBT英飞凌IGBT模块Infineon英飞凌SEMIKRONSanRex西门康整流桥三社可控硅

富士IGBT