简体中文 English Welcome to http://www.henlito.com| Add Favorite

  HOT SEARCH:SC28L198A1BE 
Home Stock Centers Photo Gallery Brand Category Information goods Online order Contact About
Quick Search
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9
News & Events Address:Home > News & Events

SN75LV4737ADB 3.3-V/5-V Multichannel RS-232 Line Driver/Receiver


source: | post time:2010-02-16

Pricing / Packaging

Device Status Temp (oC) Replaced By Price | Quantity Package| Pins Top Side Marking Package QTY| Package Carrier
SN75LV4737ADB ACTIVE 0 to 70   3.20 | 1ku SSOP (DB)| 28 View 50 | TUBE Download CAD Format for this Symbol Download CAD Format for this Footprint
SN75LV4737ADBE4 ACTIVE 0 to 70   3.20 | 1ku SSOP (DB)| 28 View 50 | TUBE Download CAD Format for this Symbol Download CAD Format for this Footprint
SN75LV4737ADBG4 ACTIVE 0 to 70   3.20 | 1ku SSOP (DB)| 28 View 50 | TUBE Download CAD Format for this Symbol Download CAD Format for this Footprint
SN75LV4737ADBLE OBSOLETE 0 to 70 SN75LV4737ADBR   SSOP (DB)| 28 View   Download CAD Format for this Footprint
SN75LV4737ADBR ACTIVE 0 to 70   2.61 | 1ku SSOP (DB)| 28 View 2000 | LARGE T&R Download CAD Format for this Symbol Download CAD Format for this Footprint
SN75LV4737ADBRE4 ACTIVE 0 to 70   2.61 | 1ku SSOP (DB)| 28 View 2000 | LARGE T&R Download CAD Format for this Symbol Download CAD Format for this Footprint
SN75LV4737ADBRG4 ACTIVE 0 to 70   2.61 | 1ku SSOP (DB)| 28 View 2000 | LARGE T&R Download CAD Format for this Symbol Download CAD Format for this Footprint

Description

The SN75LV4737A consists of three line drivers, five line receivers, and a charge-pump circuit. It provides the electrical interface between an asynchronous communication controller and the serial-port connector, and meets the requirements of TIA/EIA-232-F. This combination of drivers and receivers matches those needed for the typical serial port used in an IBM PC/AT or compatibles. The charge pump and five small external capacitors allow operation from a single 3.3-V supply, and four capacitors allow operation from a 5-V supply.

The device has flexible control options for power management when the serial port is inactive. A common disable for all of the drivers and receivers is provided with the active-high STBY input.

Features

  • Single-Chip and Single-Supply Interface for IBM PC/ATTM Serial Port
  • Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU v.11 Standards
  • Operates With 3.3-V or 5-V Supplies
  • One Receiver Remains Active During Standby (Wake-up Mode)
  • Designed to Operate at 128 kbit/s Over a 3-m Cable
  • Low Standby Current...5 uA Max
  • ESD Protection on RS-232 Pins Meets or Exceeds 4 kV (HBM) and 1.5 kV (HBM) on All Pins Per MIL-STD-883, Method 3015
  • External Capacitors...0.1 uF
  • (VCC = 3.3 V...Five External Capacitors)
  • (VCC = 5 V...Four External Capacitors)
  • Accepts 5-V Logic Input With 3.3-V Supply
  • Applications
    • RS-232 Interface
    • Battery-Powered Systems, PDAs
    • Notebook, Laptop, and Palmtop PCs
    • External Modems and Hand-Held Terminals
  • Packaged in Shrink Small-Outline Package

Patent-pending design

IBM and PC/AT are trademarks of International Business Machines Corporation.

source:ShenZhen henlito electronic co.,ltd.

web:www.henlito.com


Prev:TL16C752BPTG4 Dual UART With 64-Byte FIFO
Next:SN74CBTD3306D Dual FET Bus Switch With Level Shifting


Home | Stock Centers | Photo Gallery | Brand Category | Information goods | Online order | Contact | About
Copyright @ 1998 - 2009 Henlito. All Rights Reserve
page load time:0.0309602 s
在线客服系统

IGBT模块IGBT 三菱IGBT英飞凌IGBT模块Infineon英飞凌SEMIKRONSanRex西门康整流桥三社可控硅

富士IGBT